For Earth for Life
KUBOTA CANADA LTD.
Find A Dealer



contact this dealer
see dealer information
change dealer
Close
Skip to main content
Find A Dealer
Close
Tractors

M6 Series

The M6 Series deluxe mid-size tractors with more cab space offer a high level of comfort even under the most demanding jobs.

Explore

Watch the Video

Starting at 
$115,018
Warranty
6 year
     
            
Launch 360 interior experience

Grand X Cab

Discover freedom from within. The M6 boasts one of the largest cabs in its class. We removed the center pillars and rounded the glass increasing both interior height and width to provide a more spacious feel. Wide-opening doors provide easier access while the unobstructed ceiling and fully flat floor guarantee more head- and legroom for a higher level of comfort even during long hours behind the wheel.

Kubota Clean Diesel Solution (K-CDS)

Kubota engines offer clean performance that exceeds even the latest emissions standards, thanks to the latest advances in clean-engine technology. Selective Catalytic Reduction (SCR) sprays the hot exhaust from the engine with diesel exhaust fluid (DEF), which transforms the exhaust into harmless water vapor and nitrogen. The Common Rail System (CRS) electronically controls the timing and amount of high-pressure injected fuel in stages for optimal combustion, which results in greater efficiency, better fuel economy, and less engine noise. The combination of these two systems with a Diesel Particulate Filter (DPF) muffler and an Exhaust Gas Recirculation (EGR) system ensures that the M6 Series to meet the latest T4 emissions regulations.

High Capacity 3pt Hitch

Thanks to its large diameter outer cylinder*, the 3-point hitch offers extra lifting capacity to easily handle jobs that require heavy implements. *High lift capacity is available as an option

Bevel-Gear Front Axle

Another Kubota exclusive, the bevel-gear front-wheel drive enables the tractors to achieve a tight turning radius, thanks to a generous 50˚ wheel-turning angle, enabling easy handling in varying conditions. The bevel gear design eliminates open U-joints and all components are hermetically sealed in oil.

Work Kruise

The M6 Series engines feature an electronic governor that electronically keeps the engine revolution constant, preventing drops in PTO speed and enabling stable operation. Used with the transmission’s Auto Mode feature, Work Kruise makes working with PTO-driven implements much more efficient. RPM Dual Memory With the press of a button, you can now pre-set and save up to two frequently used engine RPM settings. So whether you have a favorite setting for PTO work, front loader work, or changing directions, your Kubota runs just the way you want, without having to adjust the throttle.

Hydraulic System

For smooth implement handling and extra speed of front loader and rear implement operations, M6 Series tractors come equipped with gear-type hydraulic pumps. An external hydraulic cylinder improves lifting force and eases maintenance, while the adoption of an unload valve minimizes loss to hydraulic pressure to exert greater power during PTO operations when the 3-point hitch is not in use. Hydraulic Flow Valves and Auxiliary Control Valve: To ensure faster loader cycle times and instantaneous implement response, M6 Series tractors have high-flow, 18.7 gpm (M6-101/M6-111) and 20.4 gpm (M6-131/M6-141) hydraulic pump. Two remote valves come standard—an SCD/Self-Canceling Detent and FD/Float-type valve. The maximum installation is 4 valves.

Individual Flow Control Valve (2 valves Standard, up to 4 Optional)

The standard individual flow control valve allows the hydraulic flow to be a.djusted independently for up to 4 auxiliary control valves so each valve together or the valves and 3-point hitch can be operated simultaneously. The oil flow rate is easily regulated by adjusting each flow control dial

Front Loader Joystick

Located in the control console for smooth and effortless shifting and better forward visibility, our Front Loader Joystick greatly simplifies front loader operation so you can concentrate more on the work ahead. The Series Circuit makes possible simultaneous boom and bucket operation while the Regenerative Bucket Dump Circuit enables quick dumping for efficient operation with quick cycle times.

Auto 2WD

Select the Auto 4WD mode, and your M6 tractor automatically switches from 4WD to 2WD when the traveling speed exceeds 12.5mph (20km/h). 4WD will re-engaged when the traveling speed falls below 10.5mph (17km/h). Auto 4WD not only lets you move smoothly at high range, but also saves fuel and reduces tire wear.

Prev slide
Next slide

models

Promotions

Get Spring done and then some.

Beat the season’s challenges with renowned Kubota reliability. Right now get great deals on quality equipment, implements, attachments and more! So whether the season’s work is in the field, in your yard or on the job site — you can depend on Kubota to get your spring jobs done and then some.

Explore the latest deals.
Prev slide
Next slide

Optional Implements & Attachments

M6-101DTCC-F Implements & Attachments: Loaders, Snowblowers

  • Loaders
  • Lift Capacity Lbs/Kg @ Pivot Pin
  • Lift Height In. / mm @ Pivot Pin
  • Quick Attach, Bucket
  • Snowblowers
  • Width
  • Drum
  • Auger

M6-111DTCC-F Implements & Attachments: Loaders, Snowblowers

  • Loaders
  • Lift Capacity Lbs/Kg @ Pivot Pin
  • Lift Height In. / mm @ Pivot Pin
  • Quick Attach, Bucket
  • Snowblowers
  • Width
  • Drum
  • Auger

M6-131DTCC-F Implements & Attachments: Loaders, Snowblowers

  • Loaders
  • Lift Capacity Lbs/Kg @ Pivot Pin
  • Lift Height In. / mm @ Pivot Pin
  • Quick Attach, Bucket
  • Snowblowers
  • Width
  • Drum
  • Auger

M6-141DTCC-F Implements & Attachments: Loaders, Snowblowers

  • Loaders
  • Lift Capacity Lbs/Kg @ Pivot Pin
  • Lift Height In. / mm @ Pivot Pin
  • Quick Attach, Bucket
  • Snowblowers
  • Width
  • Drum
  • Auger

M6-141DTSCC-F Implements & Attachments: Loaders, Snowblowers

  • Loaders
  • Lift Capacity Lbs/Kg @ Pivot Pin
  • Lift Height In. / mm @ Pivot Pin
  • Quick Attach, Bucket
  • Snowblowers
  • Width
  • Drum
  • Auger

Downloads

Manuals

M6-101DTCC-F Download PDF
M6-111DTCC-F Download PDF
M6-131DTCC-F Download PDF
M6-141DTCC-F Download PDF
M6-141DTSCC-F Download PDF

Brochures

M6-101DTCC-F Download PDF
M6-111DTCC-F Download PDF
M6-131DTCC-F Download PDF
M6-141DTCC-F Download PDF
M6-141DTSCC-F Download PDF
CareersContact UsPrivacy PolicySite MapTerms of Use English | Français

Get in Touch

Got a question? We’re here to help. Please fill in the fields below and one of our dealers will get back to you as quickly as possible.

Thank you!

We will get back to you shortly.

Whoops!

It looks like something went wrong. Let’s try that one more time.

HAVE QUESTIONS ABOUT THIS PRODUCT?

Locate your nearest dealer to ask a question now.

 

Your Local Dealer

 

Whoops!

Your search
returned 0 results.

Please check your postal code or address for typos and try again.
If you continue to experience problems locating a dealer, you can also contact us.

Get in Touch

Got a question? We’re here to help. Please fill in the fields below and one of our dealers will get back to you as quickly as possible.

Thank you!

We have received your request at:

  • Kubota Canada Ltd. - National Accounts

  • 5900 14th Avenue
  • 905-294-7477

We will get back to you shortly.

Whoops!

It looks like something went wrong. Let’s try that one more time.

Terms and Conditions

 
*Dealer may sell for less. Dealer order/trade may be necessary. Prices, payments and models featured throughout may vary by dealer. Some restrictions apply. See your dealer for complete details. Offers valid only at participating dealers in Canada and are subject to change, cancellation or extension at any time without notice or obligation. For all offers: taxes, applicable fees (including, but not limited to, governmental environmental fees, administration fees, set-up fees, dealer fees, and delivery fees), insurance and registration are extra. Freight is included. Dealer order/trade may be necessary. Minimum down payment of 10% required for financing offers on turf and agricultural product. Minimum 25% down payment is required for all construction equipment. Specifications, features, illustrations and equipment shown online are based on the latest available information at the time of publication. Although descriptions are believed to be correct, accuracy cannot be guaranteed. We reserve the right to make changes at any time, without notice or obligation, specifications, accessories, materials, models, prices, payments and other information.
Offer valid until April 30, 2022.

Discount on loader is $1,000. Discount(s) apply before tax and require the purchase of the power unit. Loaders, mid-mount mowers and backhoes purchased individually do not qualify for this discount. Offer cannot be applied on past transactions, and has no cash surrender value. Offer valid until April 30, 2022.