Kubota Backhoe Loaders - B Series Tractor Loader Backhoes

Model

Model Name B26TLB

Engine

Make Kubota
Model D1105
Type Diesel
EPA Rating Interim Tier IV (s/n 52091 ~)
Cooling Liquid
Number of cycles 4
Aspiration Natural
Cylinders 3
Bore and stroke 3.1 x 3.1 in. (78 mm x 78.4 mm)
Displacement 68.5 cu. in. (1123 cc)
Horsepower
Engine gross @ rpm 24.3 HP (18.1 kW) @ 2800 RPM
Engine net @ rpm 23.1 HP (17.2 kW) @ 2800 RPM
PTO @ rpm 19.5 HP (14.5 kW) @ 2800 RPM
Injection pump Inline, piston type
Self bleed fuel system Yes
Fuel shutoff Key switch activated engine stop mechanism
Governor Weight type governor
Lubrication Forced lubrication
Cooling system Liquid cooled w/pressurized radiator
Radiator fan Radial air flow
Cold weather start aid Glow plugs
Exhaust/muffler Enclosed with spark arrestor
Throttle location (s) Hand control, right side-mounted for loader and or backhoe operation
Air filter Dual paper element
Oil filter Spin on cartridge

Cooling System

Type Liquid cooled w/pressurized radiator
Air flow type Radial air flow
Radiator screens Standard

Fuel System

Fuel filter Replaceable cartridge

Fluid Capacities

Fuel tank capacity 8.2 gal. (31 l)
Cooling system capacity (4.5 l)
Engine lubricant oil capacity (3.0 l)
Transmission oil capacity (26 l)
Front axle housing (4.7 l)

Chassis, Axle and Brakes

Steering type Hydrostatic power steering
Front axle type Bevel gear type, 4WD
Differential lock - Rear axle Standard
Final drive Spur gear
Brake type Wet disc
Parking brake Parking brake on master brake pedal

Drive Train/Transmission

Transmission type Hydrostatic
Number of ranges 3
Clutch N/A

Traveling Speeds (With standard tires)

Maximum traveling speed
Forward 11.1 mph (17.8 km/h)
Reverse 9.8 mph (15.8 km/h)
Low range
Forward 2.8 mph (4.5 km/h)
Reverse 2.5 mph (4.0 km/h)
Medium range
Forward 5.2 mph (8.4 km/h)
Reverse 4.6 mph (7.4 km/h)
High range
Forward 11.1 mph (17.8 km/h)
Reverse 9.8 mph (15.8 km/h)

Power Take Off (PTO)

PTO system Hydraulic, independent
Rear PTO Standard
Rear PTO speed 540 @ 2768 rpm
Mid-PTO Not available
PTO shield Flip-up type

Hydraulic System

Implement pump 7.0 gpm (26.3 l/min)
Power steering pump 4.2 gpm (16.0 l/min)
Total hydraulic flow 11.2 gpm (42.3 l/min)
Loader valve Standard
Loader 3rd function Optional
Rear remote valves Optional, max. 2
Backhoe service port Standard on BT820V model
3-Point hitch Optional
Position control Position control
Lift capacity
At lift points 2139 lbs. (970 kg)
24" behind lift point 1676 lbs. (760 kg)
Drawbar
Type Option

Electrical

Alternator 40 amp.
Battery voltage x capacity 12 volt, 433 CCA
Block heater Optional, CSA approved
Engine shut-off Electric key stop
Gauges Coolant temperature, fuel level, tachometer, hourmeter
Indicator lights Engine oil pressure, electric charge, glow plug indicator
Lights 2 front work lights, 2 rear work lights, 2 tail lights, 4 ROPS mounted turn signals / 4-way flashers
Optional lights Front work light kit, rear work light kit
Horn Optional

Dimensions

Overall height
Top of canopy 89.5 in. (2273 mm)
Overall length 198.2 in. (5035 mm) including loader & backhoe
Overall width 53.7 in. (1365 mm) / rear axle
Tread width
Front 35.6 in. (905 mm)
Rear 41.3 in. (1050 mm)
Wheelbase 62.2 in. (1581 mm)
Turning radius
With brake 6.6 ft. (2.0 m)
Without brake 8.2 ft. (2.5 m)
Weight
Power unit 4001 lbs. (1815 kg) TLB
Angle of departure Backhoe: 20.3º

Tires

Standard
Front 23x8.5-14 R4
Rear 12.4x16 R4

Safety Equipment

ROPS OSHA 1926.1002 / 1926.1003
FOPS OSHA 1926.1003
Safety switches Standard
Operator's presence control (OPC) Standard
Engine shut-off Electric key stop
Seat belts Standard, retractable
Operator’s manual storage Behind operator's seat
Engine throttle from backhoe position Yes
Spark arresting muffler Standard
Brakes Wet disc
Parking brakes Parking brake on master brake pedal
Grab handles for entry / exit Standard
Non-slip entry / exit surfaces Standard
Lights 2 front work lights, 2 rear work lights, 2 tail lights, 4 ROPS mounted turn signals / 4-way flashers
Flashers 4 safety flashers
Paint Orange
SMV Standard
Horn Optional
Back-up alarm Optional

Open Platform Features

ROPS Certified OSHA 1926.1002 / 1926.1003
FOPS Certified OSHA 1926.1003
Platform mount to frame ISO-mounted flat deck
Tilt steering wheel Standard
Seat type High-back seat
Seat swivel Standard
Beverage holder Standard

Options

Hydraulic breaker KXB310Q

Loader Specifications

Loader model TL500
Lever control Joystick
Boom cylinder
Bore 1.97 in. (50.0 mm)
Stroke 15.7 in. (399.0 mm)
Bucket cylinder
Bore 2.17 in. (55.0 mm)
Stroke 15.1 in. (382.5 mm)
Rated flow 7.0 gpm (26.3 l/min)
Net weight (approximate); lbs. (kg) 628 lbs. (285 kg)
(A) Max. Lift height to bucket pivot pin
Standard 94.5 in. (2400 mm)
(C) Clearance with bucket dumped
Standard 70.0 in. (1778 mm)
(D) Reach at max. Lift height
Standard 22.3 in. (567 mm)
(E) Max. Dump angle
Standard 45º

Loader Dimensional Specifications

(F) Reach with bucket on ground
Standard 61.5 in. (1561 mm)
(G) Bucket roll-back angle
At ground level 46º
(H) Digging depth
Standard 7.0 in. (177 mm)
Quick attach coupler Skid Steer type
Self leveling type Mechanical spill guard

Loader Operational Specifications

Lift Capacity (Bucket bottom mid point)
Standard 1102 lbs. (500 kg) @ max. height
(U) Lift Capacity (Bucket pivot pin, max height)
Standard 1300 lbs. (590 kg)
(Y) Breakout Force (Bucket pivot pin)
Standard 2344 lbs. (10417 N)
Raising time 3.5 sec.
Lowering time 3.1 sec.
Bucket dumping time 1.7 sec.
Bucket roll-back time 3.0 sec.

Loader Bucket Specifications

Standard bucket
Width 60 or 66 in.
Standard
Capacity - struck 7.8 cu. ft. (0.220 m³) or 11.3 cu. ft. (0.320 m³)
Capacity - heaped 9.5 cu. ft. (0.270 m³) or 13.8 cu. ft. (0.390 m³)
Standard bucket
Weight 278 lbs. (126 kg) or 328 lbs. (149 kg)

Backhoe Specifications

Transport height 89.1 in. (2264 mm)
Stabilizer spread transport 53.0 in. (1347 mm)
Ground clearance 11.3 in. (287 mm)
Overall width 53.7 in. (1365 mm)
Maximum digging depth 99.8 in. (2535 mm)
Digging depth
2 ft, flat bottom 98.3 in. (2498 mm)
8 ft, flat bottom 77.0 in. (1957 mm)
Operating height, fully raised 129.8 in. (3298 mm)
Loading height 77.3 in. (1963 mm)
Loading reach 52.1 in. (1324 mm)
Reach from swing pivot 133.9 in. (3400 mm)
Swing pivot to rear axle center line 33.7 in. (855 mm)
Bucket rotation 181.2º
Stabilizer spread-operating 83.3 in. (2116 mm)
Angle of departure per SAE: J1234 20.3º
Leveling angle 10.7º
Swing arc 180º
Weight (lbs) 823 lbs. (374 kg)

Backhoe Digging Force (Per SAE J49)

Arm breakout force 3123 lbs. (9444 N)
Bucket breakout force 4211 lbs. (18731 N)

Backhoe Cycle Time (seconds)

Boom cylinder
Extend 4.1 sec.
Retract 3.0 sec.
Dipperstick cylinder
Extend 4.0 sec.
Retract 3.0 sec.
Bucket cylinder
Extend 3.2 sec.
Retract 2.2 sec.
Stabilizer cylinder
Max. Height to ground 2.5 sec.
Ground to max. Height 1.7 sec.
Swing cylinder, from 70 degrees to center 1.5 sec. from 90º to center

Backhoe Hydraulic Cylinders

Boom cylinder
Rod diameter 1.38 in. (3.5 cm)
Cylinder bore 2.95 in. (7.5 cm)
Dipperstick cylinder
Rod diameter 1.38 in. (3.5 cm)
Cylinder bore 2.56 in. (6.5 cm)
Bucket cylinder
Rod diameter 1.38 in. (3.5 cm)
Cylinder bore 2.36 in. (6.0 cm)
Stabilizer cylinder
Rod diameter 1.57 in. (4.0 cm)
Cylinder bore 2.76 in. (7.0 cm)
Swing cylinder
Rod diameter 1.38 in. (3.5 cm)
Cylinder bore 2.36 in. (6.0 cm)

Backhoe Bucket Specifications

Standard
Width 12, 18, 24 in. (30.5, 45.7, 61.0 cm)
Capacity - struck 0.85, 1.34, 1.87 cu. ft. (0.024, 0.038, 0.053 m³)
Capacity - heaped 1.10, 1.84, 2.61 cu. ft. (0.031, 0.052, 0.074 m³)
Weight 84, 92, 106 lbs. (38, 42, 48 kg)
None 3, 4, 5 tooth

Other

Manuals Operator's manual

Warranty

Commercial use 12 months / no hour limit
Extended powertrain Up to 24 months or 1500 hours
Non commercial use 12 months / no hour limit

SPECS B26

SpecificationDetail

Downloads

Manuals

Brochures

Thank you!

Kubota Canada Ltd. - National Accounts

Whoops!