M6H-101

Specialty Tractors

Starting at $104,803
  • Warranty 6 year

Features

High clearance front and rear axles

When ground clearance is the key to your operation, Kubota’s high clearance tractor’s front and rear axles stand above the competition. Kubota’s bevel gear front axle provides more ground clearance than the competitors’ straight, u-joint front axles by lowering the final drive hub, allowing the axle housing to rise over the crop. Both the front final drive and rear drop box axle ride within the wheels, not limiting critical ground clearance. When wide tread settings are required, wide axle spacer kits are used, allowing the front final drive and rear drop box to remain within the front and rear wheels to not limit ground clearance (unlike the competition).

24 Speed Swing Shift Transmission

The M6H High Clearance has 4 gears on main shift, High/Low/Creep (standard) on range gear shift and a Swing Shift. Swing Shift adds 4 more speeds to the main shift by actuating the electric-over-hydraulic High/Low synchronized range shift giving you access to a total of 8 speeds. Therefore, M6H-101 has access to a total of 24 speeds.

Technology driven engine

The M6H-101 High Clearance is equipped with a Kubota turbocharged V3800 Tier IV Final engine which has a Common Rail System (CRS), intercooler and Exhaust Gas Recirculation (EGR). Employment of a Diesel Particulate Filter (DPF) and a Selective Catalytic Reduction (SCR) system for minimized emissions. Additionally, it also has a RPM Memory to recall prefered engine RPM settings with the touch of a button and Constant RPM Management to keep the engine speed constant for stable operation.

High hydraulic performance

The M6H-101 comes with 2 standard rear remote valves and can add an additional valve. Standard valves are one self-cancelling detent valve and one floating detent valve. With 17.6 GPM flow and an optional third remote valve, this tractor is ready to accept implements requiring multiple valves.

Specs

Model
Model name
M6H-101
Engine
Model
V3800-TIEF
Type
4-Direct Injection, Water-cooled 4 Cycle Diesel, Common Rail System, Turbocharger, Intercooler, DPF,
Make
Kubota
Rated engine speed
2600 rpm / 2600 rpm
Engine gross horsepower @ rpm
104.4 HP / 77.9 kW
PTO horsepower
84 HP / 62.6 kW
Displacement
230 cu. in. / 3769 cc
Alternator
80 A / 80 A
Fuel tank capacity
46 gal / 175 l
Number of
Cylinders
4
Power take off (PTO)
Type
Hydraulic Wet Clutch
Rated engine speed
540 rpm / 540 rpm
Drive train/transmission
Clutch
Hydraulic Wet Clutch
Max. traveling speed
16.37 mph / 26.34 km/h
Shuttle
Electro-hydraulic
Differential lock
Front / Rear
Brake type
Hydraulic Wet Disk Type
Drive method
4WD
Number of speeds
Forward
24
Reverse
24
Hydraulic system
3-Point hitch
Category
II
Lower link ends
Telescopic
Type
Open-Center
Total pump output
17.6 gpm / 66.6 l/min
Draft control
Top Link Draft Sensing
Rear remotes
2 standard (3rd & flow control valve optional)
Number of
Rear remote valves
2
Lift capacity
At 24 in. behind lift point OECD
3858 lb / 1750 kg
Dimensions and weight
Ground clearance
25.8 in / 655 mm
Overall height
111.6 in / 2835 mm
Overall length
168.3 in / 4275 mm
Overall width
79.9 in / 2030 mm
Wheelbase
95.3 in / 2420 mm
Weight
8157 lb / 3700 kg
Tread width
Front
61.6 in / 1565 mm
Rear
60.8 in / 1545 mm
Turning radius
Without brake
21 ft / 6.4 m
Tires
Standard
Front
13.6-38
Rear
13.6-38
Other
Hood type
Full-open

Downloads

Brochures